2004年8月20日 · After the smart fastener is created, when you go back into the property page, the option to flip will be gone. At that point, you need to redefine the mates manually. (Or at least, it works this way in SW2005 SP5.0.) Maybe that annoying behaviour is worth a bug report/feature request, if it's still present in current versions of SW.

2005年10月20日 · You could use a model dimension from a sketch. You are looking to create a foreshortened dimension. 1)Add the desired dimension to a sketch in the model.

2007年5月7日 · Standard curves exist for control valves. You need to determine which trim exists. Some manufacturers provide tables showing the percentage travel and the valve coefficient Cv at each 10%, or each 10 degrees for rotary valves.

2006年4月26日 · I'm using the smart fastener feature in my assembly (made up of several weldments). When putting a bolt through a hole, (holes created with the hole wizard) I'm not getting the option of a "BOTTOM STACK". As a result, I can't put the nut/washer on the end of the bolt. Is there something I'm doing wrong that I'm not getting the bottom stack option?

2019年2月8日 · changes component to active work part by default. If you want to place smart curves or datums on a component it won't allow it. The part you touch becomes active and the feature goes into that part. There must be a customer default for this. Dave Automotive Tooling / Aircraft Tooling /...

2011年10月13日 · I am designing a dry well. The local authorities just recommend to use a 10 year return period for rainfall intensity. As the intensity depends on the rainfall duration i.e. 5, 10, 15, 30, 60 minutes, 1, 2, 6, 12, 24, 36, 72 hours. Which of these duration should be used for a small residential...

2004年11月2日 · Hi, does anyone know why half my dimensions on my drawings seem to come out light grey and half of them black

2013年1月16日 · I'm unable to change dimensions after I've created something in solid edge. For example, I drew a rectangle using the line tool, after it's been created, using smart dimensions, I'm unable to change the dimension of the rectangle. If I change the numbers in the box, it simply says dimensions...

2011年2月11日 · I am using NX8.5 and would like to suppress a Feature Group by an expression. When I RMC the group, I can suppress it, but that is all, no option for "Suppress by Expression" I have been reading the forum and it seems like this is possible, but I find nothing on "HOW TO" Can you point me in the...

2010年9月29日 · There is a lot of discussion concerning modeling Catch Basins and their grates on this discussion forum and in the HydroCAD Manual.