2024年2月2日 · Connect your controller to the Xbox with a USB cable. Go to Settings > Devices & connections > Accessories, select the controller, and then select ... > Firmware version > Update now. 3. Hard Reset: If the sync button is not working at all, you might need to perform a hard reset. To do this, hold down the power button on the console for about ...

2023年2月28日 · In addition, some older Xbox One wireless controllers work with the Xbox Series S. As for third-party wireless controllers, the compatibility depends on the specific controller and whether it is designed to work with the Xbox wireless protocol. The Ant eSports controller you mentioned appears to be a third-party controller designed for PC ...

2023年5月6日 · I recently just got the xbox series S console and included with it a xbox series s 2020 controller. So I went ahead and bought the package, it took 2-3 days and the controller started having this issue where it would disconnect and then reconnect and then have that same variaty of issues every 5 seconds- 10 minutes depending if I wanted to ...

2025年1月10日 · It was successful and the controller worked normally on the Series S console and PC. The next day, I tried calibrating the controller for the first time using the Xbox Accessories app. I did the calibration on the console for the left *thumbstick only and everything looked fine and the controller worked normally throughout that day.

2019年7月15日 · Thank you for posting on Xbox Forums. in regards to your question about how to "unsync" a controller from a console. There really isn't a setting or button to do so on the console. The only way to "unsync" a controller would be to sync or bind the controller with another console.

2022年10月8日 · - Press and hold your controller's Xbox button until it shuts down. - Remove your controller's batteries and the Micro-USB cable (if plugged in) for a minute or two. - Press and hold your console's power button until it shuts down. - Remove all external devices from the console's USB ports. - Unplug your console's power cord for 5 minutes.

2024年12月1日 · I have my controller firmware updated, my Xbox updated. I've tried going through a power cycle, I've done everything each discussion has told me. And from what it sounds like this has been a problem FOR TOO LONG. I don't have any wireless devices interfering with my controller or Xbox. It's a weird issue that's keeping me from actually playing ...

2023年4月4日 · Many controller issues can be resolved by putting the controller through a complete power cycle. To power cycle your controller: 1. Press and hold the Xbox button for 5-10 seconds, until the controller turns off. 2. Wait a few seconds, then press and hold the Xbox button again to turn the controller back on.

2023年12月4日 · 4. Wait for the controller to connect to the console. If this doesn't work, you can try resetting your controller by following these steps: 1. Turn off your Xbox Series S console. 2. Press and hold the pairing button on the back of your controller for 10 seconds. 3. Release the pairing button and wait for the controller to turn off. 4.

2023年9月29日 · Select the controller and then select Update now. If there is an update available, follow the on-screen instructions to complete it. Second, please try to reset your controller by pressing and holding the Xbox button on the controller for 10 seconds until it turns off.