2025年1月1日 · Current setup: I am using a 48v battery (currently a 60Ah Litime 48v golf cart battery) to supply power to the XT60 solar inputs on an Anker Solix F3800 to supplement solar input on the OTHER XT60 port as the location of this setup gets poor solar coverage, especially this time of year. Yes...

2020年1月25日 · So in a recent video Will Prowse recommended using a dc charger to charge up LiFepo4 batteries to 95%. Then to use a bench top DC power supply set at 3.6 V to top balance them. Once the current reaches 0 they are balanced. I’ve been looking at chargers and bench top DC power supplys and am not...

2022年5月27日 · The original charger from Ampere Time lasted for about 6 months then died. I have run through 3 power supplies from Aliexpress since then that have all died in 1 to 6 months. Can someone please suggest a 14.6V 10A or 20A …

2024年12月8日 · A fixed 14.6 volt charger will usually cause battery overvolt protection. Having the ability to set a lower charge voltage allows the battery to reach cell balance in a few hours. Having a charger with a low stress charge voltage, Victron default 14.2 …

2020年12月18日 · Hi everyone. This might be a bit of a noob question to ask, but you guys are generally pretty supportive for people on the learning curve, so here goes. I've been operating for the last year on the battery I built, which is a 280ah 4s …

2021年3月30日 · AIMS Power CON120AC12/24DC, AIMS Power, CON120AC12/24DC, AC Converter / Battery Charger 12V & 24V Smart Charger 75 Amps - Listed to UL 458/CSA, AIMS Batteries & Chargers www.invertersupply.com PM3 24V Series - PowerMax Converters

2020年6月10日 · I have a used 24v lifepo4 pack, and I can charge it up to any max voltage I want but it will quickly settle back to 26.5v (equivalent to 13.25v for you). This is not necessarily bad - while discharging, the pack stays in the 26.0 to 26.4 range for a long time (showing the famous flat discharge curve for lifepo4).

2019年10月1日 · First the AC charger (if I can get a charger to charge at a constant voltage only) and secondly, my MPPT charge controller. It seems universal that if one stays in a discharge range between 10 and 90% of SOC that battery life will be optimized. How is this best accomplished using both methods of charging indicated above? Thanks in advance.

2021年10月6日 · Would it be feasible/advisable to DIY a LifePO4 battery (pack) charger? I am considering DIYing the following; 240V/50Hz(AC) power outlet -> 2 string cable -> Full Bridge Rectifier -> DC step down transformer (Transform DC Voltage to a voltage that matches with the battery pack down the line)...

2022年5月3日 · Does anybody have a recommendation for a battery charger for a 48V LiFePo4 Battery Bank (~ 2000 Ah , ~ 100 kWh) ? I need to use it to "fill the gaps" when the sun is not shining. Something like several x 2kW each or a big ~ 8-12 kW unit (3-phase). For use in Europe 230/400V grid :) .